wireing harness
 

i have a 90 fc i was trying to start it the other day and my friend saw a spark coming from the harness nere the oil filter is there a way i can fix it or do i need a hole new harness thanx

Well, you might be able to fix it, but if I were you, with anything electrical, I'd replace it. Thats what I would do. ;)

If it is a spark then it could possibly be an exposed wire which could be easily fixed with electrical tape. BUT since it is a spark and sparks can burn down your car I'd replace the whole harness.

Yep...you could just rig it with the taping of the wire..but change the puppy...unless you like to cook marshmollows with your burning car. :D

thanx i am going to change it u know where i can get a good yet cheap harness

I've never seen one aside from the ones Mazda themselves sell.

I dont think you may want to replace your entire harness for a wire... The only spark from around the oil filter I can think of is the starter wires.. Just replace those wires. There is a wire going to the oil pressure sending unit. but I doubt its that. Check what wire it is thats making the spark and let me know. No need in replacing the entire harness. When the harness is 14-17 years old the heat and oil residue tend to break down the plastic on the wires and that includes the connectors so be care full when disconnecting shit.. and if you can post a pic

You could call a few junkyards and find the year/model rx you have, and see if they have one thats been recked, or something... you can sometimes find a decent wireing harness out of old cars that still have plenty of life left in them, but, it might take some looking. I know the guys around here would just give it away for free if you took the time to find it and pull it out yourself, hey... its cheap!

ill put up a pic as soon as i can get a camra. every thing happened about six months ago i blow my clutch at 145 mph on the highway racing friends. i brought it to a shop to put in the cluch in, when they were done the trany was f*@ked. i had my landlord in the car to take him home did a smoke show and all of a souden my tack stopped working the light on the tack even stopped working but the car was still running i shut off the car at his house and it would not turn over sence that day.

aiight bro go ahead and post the pictures up...

You can't even get wiring harness from the dealer, so best bet is to go to junk yard and get one. You can't swap s4 and s5 (you can't use s5 wire for s4, visaversa)

And if and when you get the harness be careful removing them connectors as they are just as brittle as wires.

My suggestion is to replace that particular wire/wires completely and wrap it with thermal tape unless you want to cook that one, too :) .

I know a guy who redone his harness completely with new wires. (told me took him 2 weeks)

The ones I was referring to are salvaged ones that Mazda South here in Austin has in their parts warehouse.

Hope you didn't short out anything. Ck your fuses.

How much are they asking for one?

I'll call and find out

sounds like a good excuse to get a stand alone ECU

yup Haltech all the way...

haltechs the shit!!! i am running an E6X

sorry guys coputer has been down people are asking between $100 and $500 do u guys think a 90 wireing harness ill go on a 88 engine if i change the intank over

how much do an ecu go for

just get a haltech

in tank

lol i ment to say intake

in order to run a 90 harness, you would first have to use the 90 ecu...
then you would need to use the 90 afm, u/lim, tps, mop and some other shit, I cant think of. O yea injectors.... its a fukin mission.... shit I would charge you about 300 to change all that shit.... including the harness which is a mission..

i cut my wiring harness cuz im specail ed but i just taped it and it works fine now???

It won't be for long.

lol good luck, those harnesses are a pain in the ass coming straight from mazda, would like to know how long you shit is gunna last. Might as well start a count down

I agree that you might be able to fix it, but if I were you, with anything electrical, I'd replace it. Thats what I would do.

great answer, i agree that you might be able to fix it :D

I understand you totally since I had the same problems with my PC! I bought it years ago! Basicly it kind of out of date. I'd been living in Ottawa and I had my PC updated there but when I woved to NY and faced other challenges such as all my documents and videos was disappeared from my computer. I found one great website and contacted them at night since I was more
 worry and freaked out! raid data recovery specialists was consulted and did full diagnose free. I guess you better talk them. I believe they're able to help you! If you do, please let me know the result!