I'm an Idiot
 

Okay so im new to the rotary and still learning many things 1. does anyone know any publications that i can check out so i can get more confident on working on my rx? and 2. this has nothing to do with the first but im an idiot...i put in octane booster for about 2 months straight...what kind of long term damage could i be looking at and is there any preventative maintenance that i can do to stop said damage...i spoke with my local speed shop who have guys that know rx's very well and they said it can really mess up my plugs...should i look into immediate replacement of them? and i figured out too late on my own research that it also dries out my apex seals...i know these are a very precious item in the beautiful motor that we all know(ish in my case)and love. can anyone help me learn more bout these all important seals and what i can do to make sure they dont dry out?? the previous owner did everything he could to make her as reliable as poss with the basic tuning (rebuilt motor, street port apexi commander, new twin screws, greddy exaust, and apexi intakes.) thankyou for reading the obnoxiously long post and thankyou for your input

I would highly recommend getting yourself a shop manual. As to your long term octane booster is concerned, it alteres your detonation point and I personally do not think seals are ruined, unless due to abusive driving.

I would ck your lubrication system to make certain it's functioning properly.

Alright great thanks rocket, there hasn't been any kind of abuse in me and my babys relationship so I'll put that worry on the backburner and as for the shop manual I appreciate it, thankyou and thankyou fer your time brother

Just keep in mind that proper TLC you and your FD will be happy for a long time.

I have a habit of checking oil & coolant every time prior to start my FC :)

Alright cool I tend to check mine every third time I fill up on gas, I want to put in a gt35 turbo in. Would that decrease reliability? I know the rule of thumb with rotary is higher hp lower reliability but isn't it less moving parts from the twin screws help out?

GT35r's are great turbos to use, you need to figure out what power levels you want to achieve & follow some builds to see what they are using. Talking to some of the reputable shops / tuners will also provide great info. As far as publications already stated was a good factory shop manual to know how to do things, but there's the Performance Handbook by Mike Ancas & Street Rotary By Mark Warner that will give you some ideas.

Awesome thanks, I appreciate your alls time

Okay great, thankyou, also haha sorry, what have u heard about haltech for engine management? Better than the fc controller?

I have Haltech E6X and one day, when I can afford Haltech guru, BDC to fiine tune it for me.

Haltechs are good ecu's, I also run a Haltech in one of my cars. Seeing that you are on the East coast like me you could talk to Dave at KDrotary. http://www.kdrotary.com/ for tuning.

would you both say that u would prefer Haltechs to FC Commanders? or does anyone out there tried both and have a preference?

Haltech is pretty serious EMS. I know quite a few with it.

If you're just planning on fuel modification, FC com will just be great.

The Power FC is a fine unit to use. I do prefer the Haltech or Mircotech Units over the Power FC though. They are not that bad in price & have many functions for control. The unit in itself is just part of the equation. Without a good tuner or someone familiar with the unit it's not going to help. There are a few nice units out there like the HKS Fcon V that you may have a hard time finding tuners that have the software to tune & then there is the all mighty Motec units which are top of the line, but the price is up & tuners are not everywhere.

alright awesome thanks boosted and rocket i appreciate it all this really helps out a lot and im sure some other members and guests got a bunch outa this too

I made a list of some different options out there as far as EMS goes.
http://www.rx7forums.com/forum/showthread.php?t=2194

You can also take it to a good service center i am sure they can support you well.

I agree with I would highly recommend getting yourself a shop manual.