Welcome to the Rx7 Forum and Owners Club.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

<<<<<< Register to remove these ads >>>>>>


Go Back   Rx7 Forum and Owners Club > Specific RX-7 Models > 2nd Generation

2nd Generation 1986-1992 Discussion


Reply
 
Thread Tools Display Modes
Old 08-26-2004, 10:56 PM   #1
Jedah
Junior Member
 
Join Date: Aug 2004
Location: Houston, TX
Posts: 3
Send a message via AIM to Jedah
Default In pretty deep with my GTUS
I bought an '89 GTUS within the past 4 months and it's been nothing but trouble. I am a rotary newbie so any problem I encounter is slightly difficult, but have been able to fix what it's thrown at me until now.

When I try to accelerate, the engine noise raises, but the power output does not. It seems to barely, and I mean barely, accelerate whatsoever but has been making far more engine noise than what it ever has while in my care. The noises that I am hearing only happen when I try to accelerate and they sound like air being sucked in or spit out, but it isn't my intake that's causing it. The engine seems to be working itself to death and sounds miserable. The engine will not rev past 7000RPM and I can hardly hit 70MPH. Neither of these problems have occured before today. Before it ran out very well and I could usually hit 130 or 135MPH as a top speed. Now it is severely weakened and I could barely keep up with traffic coming home from class. For god's sake, anyone, can you help me?

If I need to come back and explain things a little better I will, I'm just flustered as hell and can't think straight.
Jedah is offline   Reply With Quote
Old 08-27-2004, 03:49 PM   #2
 
black rocket's Avatar
black rocket
Full Access Member
 
Join Date: May 2004
Location: NV
Posts: 1,059
Default
Sounds to me like vaccume leak. Engine is running rough... no power...yeah, probably a vaccume leak somewhere.

Do you have cat? It may be plugged, also. Resulting in poor performance.


__________________
Drive safe and Sane
black rocket is offline   Reply With Quote
Old 09-07-2004, 11:00 PM   #3
AutoXFC3S
Member
 
Join Date: Jun 2004
Location: NH
Posts: 38
Send a message via AIM to AutoXFC3S
Default
bump


__________________
get sideways or get out

OWNED
AutoXFC3S is offline   Reply With Quote
Old 09-24-2004, 09:49 PM   #4
BlackKnightFD
Junior Member
 
Join Date: Sep 2004
Location: Northeast, MD
Posts: 1
Send a message via AIM to BlackKnightFD
Default
like previously stated it could be a vac leak.. but also how is your clutch? it might be slipping. i had the same problem in my GTUs and it was linked to the clutch. after it was replaced no more problems.


__________________
93 Black/Black Base FD
89 Black/Black GTUs FC
BlackKnightFD is offline   Reply With Quote
Old 09-24-2004, 10:51 PM   #5
Jinx
Junior Member
 
Join Date: Sep 2004
Posts: 22
Default
Sounds like a clogged converter.
I also had an injector plug pop off on me, it took me forever to find it, cause it "Looked" plugged in.
Jinx is offline   Reply With Quote
Old 09-27-2004, 01:32 AM   #6
AusTexRex
Full Access Member
 
Join Date: Apr 2004
Location: Austin & Waco Texas
Posts: 553
Send a message via AIM to AusTexRex
Default
Pop the bell housing access panel and look at your clutch. It's probably a contributing factor to this, if not the entire problem. Won't rev past 7k? Sounds like an airflow problem, maybe your throttle cable isn't tight enough, maybe your cat is clogged, maybe you're leaking like a 2 month old baby. Check em.
AusTexRex is offline   Reply With Quote
Old 09-29-2004, 11:22 PM   #7
Jinx
Junior Member
 
Join Date: Sep 2004
Posts: 22
Default
I was just re-reading this, and I'm with AusTexRex. Maybe you have a clogged cat and a busted clutch.
Jinx is offline   Reply With Quote
Old 09-30-2004, 12:57 AM   #8
Canaduh
Full Access Member
 
Join Date: Sep 2004
Location: Manitoba, Canada
Posts: 194
Send a message via MSN to Canaduh
Default
Does it start to hesitate really bad around 3800RPM? and then choke from there on? If it does its your ECU. Also, don't take it to a dealer just ye, he will replace the whole ECU and will cost lots, then if you just re-solder the ECU joints and re-ground. Hope that helped.

Oh and im new here, hi everyone.
Canaduh is offline   Reply With Quote
Old 09-30-2004, 02:53 AM   #9
AusTexRex
Full Access Member
 
Join Date: Apr 2004
Location: Austin & Waco Texas
Posts: 553
Send a message via AIM to AusTexRex
Default
Welcome maple leaf.
AusTexRex is offline   Reply With Quote
Old 09-30-2004, 07:13 PM   #10
Canaduh
Full Access Member
 
Join Date: Sep 2004
Location: Manitoba, Canada
Posts: 194
Send a message via MSN to Canaduh
Default
Thanks tex.


__________________
Turbo lag was created to give V8's a chance.
Canaduh is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump