Welcome to the Rx7 Forum and Owners Club.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

<<<<<< Register to remove these ads >>>>>>


Go Back   Rx7 Forum and Owners Club > General RX-7 Area > TECH Support

TECH Support Technical Support for your RX7, Open 24/7/365. Post your problems and see if someone can help!


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-31-2013, 05:31 PM   #1
Minnesota
Junior Member
 
Join Date: Jul 2013
Location: Central MN
Posts: 4
Default Fixing existing engine harness or rewire from scratch?
I'm building an 87 RX-7 (turbo or N/A haven't picked an engine yet, Manual trans) from basically scratch but have most of the main harness, a hacked up dash harness and a mildly hacked up engine harness (previous owner tried doing a 2JZ swap).

my questions are:
would it be cost effective/reliable to just fix the harnesses i have (just replace the plugs and wires that were cut off), purchase another harness off ebay, classified section, etc. , or start from scratch and build a new harness (i'll elaborate on this in a second)

are new oem style plugs available for purchase or am i going to have to find some off existing harnesses?


elaboration of intent:
project goal: restoration/weekend drift car (short distance driving/track car)
what's getting deleted: Sunroof, stereo and audio wiring, electronic locks (if applicable), flip headlights (going with fixed for reliability and weight savings)
electrical skill level: surface mount soldering, fully capable with digital multi-meter, anal about perfection in finish and performance
I will be carefully removing any wiring regarding the systems i'm getting rid of to make trouble shooting easier long term. Also if i go through the effort of making a harness from scratch i will be making a couple (plug availability permitting) to make the bulk wire purchase worth it.


__________________
This is where my sig should be
Minnesota is offline   Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump