Welcome to the Rx7 Forum and Owners Club.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

<<<<<< Register to remove these ads >>>>>>


Go Back   Rx7 Forum and Owners Club > Specific RX-7 Models > 2nd Generation

2nd Generation 1986-1992 Discussion


Reply
 
Thread Tools Display Modes
Old 07-07-2004, 02:31 PM   #1
Turbo7
Junior Member
 
Join Date: Jul 2004
Posts: 6
Default Ignition leads
I pulled my leads off when changing my plugs and forgot to check which lead went with which plug location.

Can someone please tell me which lead goes where.

Thanks in advance
Daniel
Turbo7 is offline   Reply With Quote
Old 07-07-2004, 11:23 PM   #2
AusTexRex
Full Access Member
 
Join Date: Apr 2004
Location: Austin & Waco Texas
Posts: 553
Send a message via AIM to AusTexRex
Default
the one on the left goes on the left. the one on the right goes on the right. follow them all the way back.
AusTexRex is offline   Reply With Quote
Old 07-08-2004, 11:11 AM   #3
Turbo7
Junior Member
 
Join Date: Jul 2004
Posts: 6
Default
That makes sense, but which lead goes to the top plug and which lead goes to the bottom plug on each rotor?
Turbo7 is offline   Reply With Quote
Old 07-08-2004, 06:17 PM   #4
AusTexRex
Full Access Member
 
Join Date: Apr 2004
Location: Austin & Waco Texas
Posts: 553
Send a message via AIM to AusTexRex
Default
Blue ones go on top, black ones go on bottom. Assuming you didn't change your wires. If you did, then standing on the driver (US) side of the car, looking into the bay you will see two wires coming from the left, and two wires coming from the right. The one on the left, from the left goes into the top left plug. the one on the left from the right goes on the bottom left plug, yatta yatta.
AusTexRex is offline   Reply With Quote
Old 07-08-2004, 10:52 PM   #5
 
Shaggy's Avatar
Shaggy
Administrator
 
Join Date: Feb 2004
Age: 47
Posts: 779
Default
You lost me Aus..


__________________
Shaggy is offline   Reply With Quote
Old 07-09-2004, 11:22 AM   #6
Turbo7
Junior Member
 
Join Date: Jul 2004
Posts: 6
Default
Thanks Aus!
All of my leads had been replaced in the 1 colour, blue.
Turbo7 is offline   Reply With Quote
Old 07-10-2004, 05:37 PM   #7
Turbo7
Junior Member
 
Join Date: Jul 2004
Posts: 6
Default
Ok, I put the leads back on and my car won't start.
The leads from the left box on the top plugs and the leads from the right go on the bottom??
Turbo7 is offline   Reply With Quote
Old 07-11-2004, 05:48 PM   #8
 
black rocket's Avatar
black rocket
Full Access Member
 
Join Date: May 2004
Location: NV
Posts: 1,059
Default
OK, Leading side coil is located in front of the car and trailing side coil is toward firewall.

When you removed the plug wire did you pulled it off by pulling boot?

When you attempt to start the car, does it make clicking noise?


__________________
Drive safe and Sane
black rocket is offline   Reply With Quote
Old 07-12-2004, 10:01 PM   #9
AusTexRex
Full Access Member
 
Join Date: Apr 2004
Location: Austin & Waco Texas
Posts: 553
Send a message via AIM to AusTexRex
Default
Check grounds. make sure plug are all the way in, and yes the ones from the front go on top. the ones from the firewall area go on the bottom.
AusTexRex is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump