Welcome to the Rx7 Forum and Owners Club.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

<<<<<< Register to remove these ads >>>>>>


Go Back   Rx7 Forum and Owners Club > Specific RX-7 Models > 3rd Generation

3rd Generation 1993-Current Discussion


Reply
 
Thread Tools Display Modes
Old 03-17-2012, 03:16 PM   #1
CrazythingRX7
Junior Member
 
Join Date: Mar 2012
Posts: 2
Default Are FD motors different auto vs manual?
I am a first gen guy, I have street ported a 12a so I have a little rotary know how. I am Lost on FD's and want to know if the motors are different automatic vs manual tranny like the RX8 or are they the same HP wise?
CrazythingRX7 is offline   Reply With Quote
Old 03-30-2012, 02:09 PM   #2
Mikey24
Junior Member
 
Join Date: Mar 2012
Age: 38
Posts: 2
Default
Well speaking from the auto side of things i know that the manual FD's are quicker. I think this is mostly due to not knowing when the car is going to change gear half the time in the auto. Im quite often left surprised or shouting at it to change gear lol.

A semi auto lever would be better but i dont think they do one for the FD.

I must admit im changing mine from auto to manual. Theres just something about changing gears that feels good about a car.
Mikey24 is offline   Reply With Quote
Old 05-29-2012, 10:15 PM   #3
 
BoostedFC's Avatar
BoostedFC
Full Access Member
 
Join Date: Sep 2010
Location: Fredericksburg, Va
Age: 44
Posts: 785
Default
The power difference is because there is a higher drivetrain loss in the auto then in the manual transmission. The auto motor do have the correct rear counter weight when doing a light weight flywheel.


__________________
Supercharged or Turbocharged, Boost is Boost
Big Body on 335's!!!!!
BoostedFC is offline   Reply With Quote
Old 03-22-2013, 05:09 PM   #4
CrazythingRX7
Junior Member
 
Join Date: Mar 2012
Posts: 2
Default
Mazda dealer parts list have different part numbers for automatic engines and manual engines. That is why I ask this question and to see what I would have to do to change to a manual tranny. So what I am seeing from the two replies the counter weight is the difference?
CrazythingRX7 is offline   Reply With Quote
Old 02-06-2014, 09:09 PM   #5
reclaimer auto
Junior Member
 
Join Date: Feb 2014
Posts: 10
Default
yes....... Yes. However all are interchangeable. Rear irons different but works. There are lots of differences in the fd motors years and options, it can be compared to ls motor options. There are a lot. but its all pretty well the same.
reclaimer auto is offline   Reply With Quote
Old 12-05-2016, 10:14 AM   #6
 
marathonboats's Avatar
marathonboats
Junior Member
 
Join Date: Jan 2016
Location: United States
Age: 38
Posts: 21
Send a message via Yahoo to marathonboats
Default
Originally Posted by CrazythingRX7 View Post
Mazda dealer parts list have different part numbers for automatic engines and manual engines. That is why I ask this question and to see what I would have to do to change to a manual tranny. So what I am seeing from the two replies the counter weight is the difference?
I agree That is why I ask this question and to see what I would have to do to change to a manual tranny.
marathonboats is offline   Reply With Quote
Old 01-14-2018, 09:57 PM   #7
Crocci
Junior Member
 
Join Date: Jan 2018
Posts: 6
Default
Thanks for information
___________________
192.168.1.1
Crocci is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump